Re: Help, IIe died

[Rubywand <rubywand@swbell.net>]

Stuart A. Naulty writes ...
> 
> My IIe stopped working.  When Prodos starts to boot it crashes into the
> monitor at 7004.  It crashes at the same line everytime I try to boot
> either from a 5.25, 3.5 or hard drive.  Does the *7004 line indicate
> where the problem lies?  Bad memory chip?  Bad video chip? ....

     The *7004 ... indicates that program execution is going somewhere it 
should not and bumping into a Break instruction. You may have a bad IC 
or an IC or connector or Slot card which is not making good contact on all 
pins.

     There are all sorts of tests you could do; but, it may be easier to 
try the 'usual cure' first. With power OFF, scootch up and resocket each 
IC; and, unplug and replug each internal connector and Slot card.


Rubywand