[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: RamFast confusion
- Subject: Re: RamFast confusion
- From: cjansen@mail.execpc.com (Chris Jansen)
- Date: 1997/05/04
- Newsgroups: comp.sys.apple2
- Organization: Exec-PC BBS Internet - Milwaukee, WI
- References: <5kdn33$9nr$1@earth.execpc.com> <5kg9jg$ejo@lynx.unm.edu>
- Sender: -Not-Authenticated-[9102]
- Xdisclaimer: User not authenticated
: When I tried to add a new device to my IIGS with a RamFast card the
: computer became confused. I removed the new device but the card now
says
: it has incompatible configuration data.
: Under GS/OS volumes the only volume listed is CVTech.ID3.A But when
I go
: into ScsiUtils the device on ID 3 has 8 volumes on it. The volumes
all
: have my custom names on them. None has the name CVTech.ID3.A.
: All volumes are active. I have tried to unactivate and unmap all
volumes
: but the CVTech volume still shows up. I have also tried to change
SCSI
: ID's and cycle power but the RamFast stores the configuration data on
the
: disk.
: Has anyone seen this or does anyone know how to reset the
configuration
: data for the RamFast and just read the partition information of the
disk
: itself.
>But the experts can better advise you if you state the MODEL of RamFast
>(Rev. B, C, or D).
>
>If the ROMs U14 or U15 have numbers on them, identify the ROM version.
>
I have a RamFast Rev D with a rev RF301-EZ labeled rom and 1 Meg ram.
Chris