Re: Can't configure my RamFast SCSI card

[dempson@actrix.gen.nz (David Empson)]

Laer Haider <lkhaider@concentric.net> wrote:

> Now there's another problem.  The RamFAST is recognizing the 4
> partitions of the hard drive and the 1 or 5 partitions of the
> Bernoulli Box (depending on the cartridge I have in it).  But GS/OS
> only recognizes the first 2 partitions of the hard drive and nothing
> else.  I can't access most of my information that I keep on /Hard3
> (my data storage area) and /Hard4 (my downloads and misc. files
> area).  Am I overlooking something?
> 
> ProDOS-16 isn't having any trouble seeing all of the partitions that
> are mapped via the RamFAST-only GS/OS can't see them.

Do you have the RamFaster Driver installed on your boot volume?  If not,
then GS/OS will be generating a driver which will be calling the ProDOS
block driver on the card.  The GS/OS generated driver does not support
the slot remapping provided by the RamFast, so you will only be able to
see two partitions.

ProDOS-16 is just ProDOS-8 in disguise, so it is recognising the
remapping.

-- 
David Empson
dempson@actrix.gen.nz
Snail Mail: P.O. Box 27-103, Wellington, New Zealand