[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Model #s; Originally Re: Printer questions
nathan@visi.com (Nathan Mates) replied to <kristelli@mail.earthlink.net>
about printer questions:
> You noted what model number it is, but didn't note the manufacturer.
> If it's by Apple, it probably will work. Other ones,
> depends on whether it's compatible with the software you're using--
> serial dot matrix printers will probably be the most compatible.
> Quoting from the comp.sys.apple2 Frequently Asked Questions (FAQ)
> at http://www.visi.com/~nathan/a2/faq/csa2.html, sections 2.4 and
> 4.4:
Nathan Mates,
A reference of Apple model numbers should be in a FAQ, IMO. Here's a
few for a start:
Model number: Equipment: Comment:
--------------------------------------------------------------------
PRINTER
A9M0303 Image Writer I (beige)
A9M0310 Image Writer II (white w/ power connect on
right rear leg)
MOUSE
A2M4015 Mouse (beige original //c mouse)
A2M2070 Apple Mouse IIe (platinum came w/ IIe card)
DRIVE
A2M2053 Unidisk 3.5 (white)
CPU
A2S2064 Enhanced //e (beige case)
A2S4000 Original //c (white -- This particular CPU
was an early "print peek (64447) 0" //c. The model# label is a printed
stick-on label, in an inset. Same model# (A2S4000) case on a later model
has the label facts molded into the case with only the serial # a stick-on
label.)
MONITOR
A2M2010 Green Phosphor (two-tone beige; crt case
Monitor II and controls are darker.)
A2M6020 AppleColor (platinum and heavy! plugs )
Composite monitor into //c, //e w/RCA connect
coax; same as Monitor II.)
A2M6014 IIgs AppleColor (platinum)
RGB Monitor
Anyone care to add, correct, and post...?
-- nancy
ProLine: pro-aplbytrs!nancyc@pro-nsdapple
Internet: pro-aplbytrs!nancyc@pro-nsdapple.cts.com
UUCP: crash!pro-nsdapple!pro-aplbytrs!nancyc