Pinout for Hardware Handshaking Modem Cable?

[jeffross@tcd.net (Jeff Ross)]

Hi all--

I just dug out my //e to loan to a friend so he can get on the internet. 
In my not so infinite wisdom, I pulled the covers off my hand made
hardware handshaking cable to compare what was there to what Proterm's
manual says it's supposed to be.  Now, the cable's been around a few other
places, so looking at all those unsoldered wires made me think something
wasn't right.  I hastily soldered everything back to the Proterm manual
specs and, yes, you guessed it, it now doesn't work.

I even know where I have the specs I used to wire it up the last time.  On
a 5 1/4 floppy right here.  The //e that can read this floppy is now 50
miles away.  I scanned the FAQ real quick, but couldn't find the pinout.

Could somebody please e-mail me the correct pinout?  I have an enhanced
//e with Apple's Super Serial card, and I'll be hooking up to a USRobotics
14.4 modem.

I thank you, and my friend, who now has everything but a dang cable to get
on the internet, thanks you!

Jeff Ross

-- 
Jeff Ross                                                                    
1102 Talbot Ct             �We keep passing unseen through moments
Cheyenne, Wyoming   82001      in other people�s lives.�   Robert Pirsig
jeffross@tcd.net            _Zen_and_the_Art_of_Motorcycle_Maintainance