[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Serial device interface, X-10 for the Apple II

Subject: Re: Serial device interface, X-10 for the Apple II
From: spec@vax2.concordia.ca (Mitchell Spector)
Date: 1996/10/18
Distribution: world
News-software: VAX/VMS VNEWS 1.50AXP
Newsgroups: comp.home.automation, comp.sys.apple2
Organization: Concordia University
References: <3266CBF4.7344@servtech.com>
Sender: spec@vax2.concordia.ca (vax2.concordia.ca)

In article danbowen@servtech.com writes...

>Does anyone have (or know where to get) some X-10 control software or
>other automation software for the Apple II line, including the IIGS?

    In my archive of disks, I located a CDA (Classic Desk Accessory)
for the IIgs called "X-10 Powerhouse". I believe it was written by
David R. Hill sometime back in 1987 or so, and most likely freeware.
It should provide some of the functions of X-10, although probably 
not all judging by it's size (about 3.5K).

Mitchell Spector
spec@vax2.concordia.ca

References:
- Serial device interface, X-10 for the Apple II
  - From: Dan Bowen <danbowen@servtech.com>

Prev by Date: Re: Re Apple II e.....Can I use Inkjet or Lasers ??????
Next by Date: Re: Apple // Game Gods
Previous by thread: Re: Serial device interface, X-10 for the Apple II
Next by thread: Re: Serial device interface, X-10 for the Apple II
Index(es):
- Date
- Thread