[no subject]

The AppleII 3.5 controller/SuperDrive can go with ZipGS set to fast
for that slot.  The 5.25 drive needs to go 'slow', but I think that
the smartport firmware does this auto-'magically'.  So I suggest that
you set the slot6 to 'fast' and in the event that you want to switch
in the 5.25 drive and switchout the superdrive let the smartport handle
the 5.25 drive.  [If smartport requires slot6 set to slow for 5.25 access
then you will have to remember to fix the slot speed at the time you
switch the slot between internal port and 'your card'.  Test this out
very thoroughly on some non-critical 5.25 disks, especially writing to
the 5.25 disk.]

  --Steve  (steven-nelson@uiowa.edu)