Re: More Zip stuff...missing docs

[spec@vax2.concordia.ca (Mitchell Spector)]

In article gdr@eddore.myrias.com (Devin Reade) writes...

>Start out with the default settings they show in the manual.  That
>is accellerated for all slots except 2 and 6.  Slot 6 must remain
>unaccellerated if you are using a 5.25" drive.  I suspect the slot 2
>is due to problems with some modems.
> 
>Since I don't normally have the 5.25" drive attached, I keep slot 6
>accellerated as well.

    No one answered this question before, but what if you have an
Apple II 3.5 Disk Controller Card in slot-6? Assuming it makes a 
difference with the card and SuperDrive, should the ZipGS have that 
slot set to 'fast' or 'slow'? I also have an Apple 5.25 connected to 
the Smartport, but I mostly keep it inactive by setting slot-6 to 
'Your Card'.

Mitchell Spector
spec@vax2.concordia.ca