Re: Prograppler Printer Card

[markj@infocom.net (Mark Johnson)]

In article <4ubn8d$hlh@senator-bedfellow.MIT.EDU>,
pbauer@athena.mit.edu (Paul H Bauer) wrote:

><        I just acquired a ProGrappler printer card and would like to use
><it with an HP LaserJet IIP plus. Does anyone know what the Dip switch
><settings should be? This will be used on a GS Rom 3.
><
><pbauer@mit.edu

Here is the info you need right out of the Grappler Manual
Dip Switch Positions                        1*   2    3    4

Epson Dot Matrix Printers                  OFF  ON   ON   ON
Panasonic KXP-1090                         OFF  ON   ON   ON
Smith-Chronba D-100/200/300                OFF  ON   ON   ON
C. Itoh 8510 EP                            OFF  ON   ON   ON
Nec 8023/c. Itoh 8510/ProWriter            OFF  ON   ON   OFF
Star Gemini                                OFF  ON   OFF  ON
Anadex Printers                            OFF  ON   OFF  OFF
Okidata 82A, 83A, 92,84                    OFF  OFF  ON   ON
Okidata 84 w/o Step II Graphics            OFF  OFF  OFF  ON
Apple Dot Matrix                           OFF  OFF  ON   OFF
IDS/Dataproducts                           Switch settings do not matter


* Switch 1 controls the MSB. When this switch is in the on position the MSB is not sent. MSB is under software control when Switch 1 is OFF.
 



GUNS don't Kill People,Sucking wounds and shredded innards do! Or a Case of Lead Indigestion.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                        **************************
                        * I'm the NRA and I Vote *
                        **************************

Markj@infocom.net
markj25@aol.com