Re: AE TW2E DIP SWITCHES...

[jpoore@pro-palmtree.cts.com (James Poore)]

My Transwarp Manual shows the switch settings differently.

Bank 1 sw 1-7 are set to on if you have a bank-switched in a particular
slot. i.e.  sw1 is for slot 1, sw7 for slot7.

Bank 2 sw 1-7 are set to on for transwarp speed, again sw1 for slot 1, sw7
for slot 7.

Switch 8 on both banks establish at what speed the computer will boot at.

Speed  Bnk1 Sw8  Bnk2 sw8

3.6MHz open/off  open/off
1.7MHz closed/on open/off
1.0MHz open/off  closed/on
1.0MHz closed/on open/off

Typical settings for bank 2

parallel printer card----on
serial interface---------off
Transwarp card-----------on
clock cards--------------off
bankswitched mem cards---on also corresponding sw on bank 1 on
floppy cards-------------off
empty slots--------------on

Jim


-----
The Palmtree BBS  310-453-8726 v.32
Inet: jpoore@pro-palmtree.cts.com