Re: Installing Hyperstudio on a hard disk

[Toinet <antoine.vignau@laposte.net>]

On 17 mai, 09:18, Polymorph <mike.a.steph...@gmail.com> wrote:
> On May 17, 5:03 pm, Toinet <antoine.vig...@laposte.net> wrote:
>
>
>
>
>
> > On 17 mai, 03:18, KP <kjpm...@gmail.com> wrote:
>
> > > On May 16, 6:09 pm, Toinet <antoine.vig...@laposte.net> wrote:
>
> > > > On 16 mai, 22:52, KP <kjpm...@gmail.com> wrote:
>
> > > > > To install Hyperstudio on an emulated hard disk, do you just use the
> > > > > Finder to copy all of the files from all of the floppies over to the
> > > > > hard disk, or is there a formal install/setup program that should be
> > > > > used?
>
> > > > You can do proceed either way but there is an Installer program in the
> > > > program disk. There are several scripts:
> > > > - A.C.E. Toolset
> > > > - All Accessory Programs
> > > > - All Clip-Art
> > > > - All Clip-Sounds
> > > > - All Files on Hard Drive
> > > > - All Sample Stacks
> > > > - Small Installation
>
> > > > - A.C.E. Toolset:
> > > > This script installs the Audio Compression and Expansion Toolset.
> > > > These files will be installed on the selected disk, and you will need
> > > > the /SystemTools1 disk for GSOS 6.0 or later.
>
> > > > - All Files on Hard Drive:
> > > > This script installs all the HyperStudio files in several folders in a
> > > > main folder called HyperStudio on your hard disk, plus a number of
> > > > fonts on your startup disk.
>
> > > > You will need the version 3.1 disks /HS.System, /HyperStudio, /Samples.
> > > > 1, /Samples.2, /HS.Art, and /HS.Sounds.
>
> > > > - Small installation: (typo in the help file)
> > > > This script installs the only the HyperStudio program and Home stack
> > > > in the folder called HyperStudio on your hard disk.
>
> > > > You will need the version 3.1 disk /HyperStudio.
>
> > > > > Also, why would running Hyperstudio from a hard disk give the error
> > > > > "This application needs Tool029 in the System:Tools folder."?
>
> > > > See above, the Tool029 is probably mandatory for HyperStudio to run.
> > > > Use /SystemTools1 for GS0S 6.0 or later to install it. You can
> > > > download it fromhttp://www.brutal-deluxe.fr/public/system/
>
> > > > Antoine
>
> > > Thank you!  Follow-up question: Is there any way to import any type of
> > > audio (at any bitrate) from a modern machine into an emulated GS
> > > running HyperStudio?  (For those of us who don't have a HyperStudio
> > > card & mic on our real-world IIgs.)
>
> > There are several GS programs that can import 8-bit waveforms such as
> > rSounder. I assume you don't want a program that comes with a digit
> > card and/or microphone as you are on an emulated GS.
>
> > rSounder is a great software, imports Mac resources IIRC and it allows
> > you to define the frequency, output formats are numerous. It can be
> > found here:http://mirrors.apple2.org.za/apple2.caltech.edu/sound/rsounder3.shk
>
> > Then import the IIgs waveform to HyperStudio.
>
> > antoine
>
> "Audio Zap" is another good audio editor for the IIgs (its the one I
> use). Can read/write a number of formats. Simply copy your sound file
> into your emulators drive image, load the sound file in Audio Zap and
> save to your desired destination format.
>
> Cheers,
> Mike

http://mirrors.apple2.org.za/apple2.caltech.edu/sound/audiozap.shk

antoine