[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Help

In article <sjlee-0907962318410001@seungjoo.hip.berkeley.edu>, sjlee@uclink.berkeley.edu (Seungjoo Lee) says:
>
>
>I have a trouble sending a fax after I installed Quick Draw. After that, I
>could not find out fax driver in the chooser. I have no idea what's going
>on. Please help!! For your reference, I have power macintosh 7100/80 and
>global village (teleport II) fax/modem.
>
>Lee
>sjlee@uclink4.berkeley.edu

I'd better get in before one of the less polite CSA2 users jumps in here!

I could probably help you - do you mean QuickDraw GX? You'll need 
_at least_ 16 MBytes RAM to use this reliably, and really System 7.5
Update 2.0 (which fixes memory leaks). Stick to standard drivers!

You also need to install Fax Sender GX, it is probably in Apple Extras or
on the Fax disk (if you don't have it, either try info.apple.com or revert
to original drivers).

And, of course - in future, these postings will get a quicker reply on
comp.sys.mac. You may get flamed by less tolerant people on CSA2.

Hope I've been of some help..
Richard
http://www.photonpub.co.uk/appleretro/