[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Dungeon Master ?



RUBYWAND (rubywand@aol.com) wrote:
          ^^^^^^^^^^^^^^^^
              ^^^^^^^^
               ^^^^^^
                ^^^^
                 ^^
I just got helped by an AOL user!!!!!!!!!!!!!!!!!!!!!!!
Good God!!!!!!!!!!!!!

Rubywand see http://www.thelist.com for an ISP in your area.
Also read alt.aol-sucks. Why pay $2.95 an hour after 5 hours?
Or pay for their 20/20 plan? A good ISP costs $15 bucks a month flat 
rate. Plus they don't censor you. No TOS! 

I can't believe someone with your knowledge would be on AOL. Well, unless 
this is a free account of course.

: In article <4n9a7v$s5q@samba.rahul.net>, Matthew Carlson
: <carlson@rahul.net> writes:

: >
: >I have got version 2.0 of Dungeon Master and have been wondering how to 
: >copy it. I tried CopyIIPlus version 9 I believe. Well, it loads, it runs 
: >(a little bugy sometimes) but I can't save a game without sticking in the

: >original disk. I have had that original disk for a while now can I don't 
: >think it has much life left. 
: >....
: >

Okay here is what worked. I used CopyIIPlusV9 AutoCopy with the 
parameters for Dungeon Master. This does a sector copy and then bit 
copies a couple sectors of the disk. A full bit copy of the entire disk 
does not work! I then changed the bellow bites on the copy. When I tried 
to run it I had a FST error. So I ran CopyIIPlusV9 again with Dungeon 
Master C parameter. This just bit copied those same sectors as before, 
assuming a sector copy had already been done. I looked at the bytes I 
changed and they where still changed. I have tested the save feature of 
Dungeon Master from the Hall of Champions and it seams to work! Great!


Now we got to get this game in the public domain. I have seen Dungeon 
Master II on the Atari ST. There is a emulator for the Atari ST on the 
PC. I would love to run in it on a PC!


:      In COMPUTIST #75 Robin Locksley suggests the following mods to Block
: $104 on a version 2.0 backup:

: byte $110   change 18 to 38
: byte $114   change 38 to 18

:      If the bytes are not found in Block $104, scan for 18 AB 2B 6B 38. Do
: the two byte changes.


Thanks........

: Rubywand