Re: Laser Printing from Appleworks

[gareth@vcn.bc.ca (Gareth Jones)]

Jim.Low@logicbbs.org wrote:
: I print from AppleWorks 3 to 5 to a laser printer all the time.  However, 
: it's an AppleTalk printer (Personal LaserWriter 320), and I'm running with 
: an Apple IIgs with AppleTalk turned on.  You must load the ImageWriter 
: emulator from the IIgs Control Panel before AppleWorks will print to an 
: AppleTalk printer.  Within AppleWorks, you select "ImageWriter II" as the 
: printer, and select the AppleTalk slot for the printer slot (always slot 7 
: in a ROM01 IIgs).

My copy of AppleWorks is version 3, so I can't verify this personally, 
but I recall that Hewlett-Packard printer drivers were added to versions 
4 and 5 of AppleWorks, which are sold through Scantron Quality Computers. 
I'm sure their tech support line will give you the skinny before you 
plunk down the dollars for an upgrade. 

Here's the info I have:

Quality Computers
800-890-8263 /800-777-3642
810-774-7740 (tech support) M-F: 9am-8pm, Sat:10am-4pm
Fax: 810-774-2698


-Gareth