Super Serial Card setup

[ma@unislc.slc.unisys.com (Marlin Allred)]

I want to thank all the people that responded to setting up the switches
on the Super Serial card.

What I would like to do is use an Apple IIGS as a host computer and an 
Apple IIe as a terminal directly connected to the Apple IIGS. The SSC
is in the Apple IIe. The jumper block is set to Terminal mode and the
card is set for communications with interupts turned on and the baud
rate is 19200.

Can I use the dumb terminal emulator on the SSC card to talk to the
Apple IIGS? What else is needed?

The problem I get is the program on the Apple IIGS needs to have the 
GPi and the HSKi pins reflect their correct states and they are always
true.