[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Need Grapper+ Info.
- Subject: Re: Need Grapper+ Info.
- From: Tom Zuchowski <71214.1670@CompuServe.COM>
- Date: 1996/03/16
- Newsgroups: comp.sys.apple2
- Organization: CompuServe, Inc. (1-800-689-0736)
- References: <4icibd$6ih@news.asu.edu>
Slot 3 is reserved for 80-column screen operation. Move the
Grappler to Slot 1 (leftmost slot in the back) and try that.
If it still doesn't work, then try to find out if your printer
cable and printer are good.
What printer are you using? that might make a difference.
The Grappler's "Transparent Mode" is set up by setting all
switches to OFF. That works for me.
TomZ