Re: Some more 14MHz '816 problems - Update

[gachot@carros.enet.dec.com ()]

|>Snip snip
|>
|>Last night I put the jumpers on T2 & T3 back on and restarted at ZipGS
|>with the 60MHz osc.  And what happened?  I booted just fine. 
|>Unfortunately, it locked up after a few minutes.  What happened is that I
|>tried to access a disk in the Finder and nothing happened.  The screen
|>didn't freeze up though. I still had mouse control, I just couldn't click
|>on anything.
|>When rebooting, the GS crashed again as before.  So cold booting seems to
|>function better and warm booting.  This does refer to temperature since
|>letting the GS cool down seems to allow it to power up correctly once.
|>But, letting the GS boot under ProDOS 8 does still not present any problems.
|>So what's wrong, what is GS/OS using and ProDOS 8 not that causes the GS
|>to crash?
|>


	I get the same behavior with a TWGS and a 50Mhz
	osc. The IIgs is working a few minutes and then
	I get a crash or a hanging system. with a 40Mhz
	osc all is working fine at 11mhz.

	So I decided to stay with the 40Mhz osc.

		-Erik Gachot.