[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IW2 printhead

Subject: Re: IW2 printhead
From: scottw@onyx.southwind.net (Scott Weierich)
Date: 1995/11/24
Newsgroups: comp.sys.apple2
Organization: SouthWind Internet Access, Inc.
References: <8B5854F.0221001238.uuout@digitec.co.za>

STEPHEN SHAW (stephen.shaw@digitec.co.za) wrote:
: Does anyone have a source for IW2 printheads. At US$170 each here I may
: have to scrap the printer. If anyone can recommend a printhead
: reconditioner I'll use him/her instead.

:  * 2qwk! 2.0 * Experiencing tagline difficulties, please stand by.

Have you tried spraying the pins liberally with a WD-40 type lubricant? 
If not, try it and then run the printer through the test page several times.


Scott

References:
- IW2 printhead
  - From: stephen.shaw@digitec.co.za (STEPHEN SHAW)

Prev by Date: ASCII Helper v1.10 8bit & Shell
Next by Date: Info. On Bard's Tale 1,2&3(?)
Previous by thread: IW2 printhead
Next by thread: re:IW2 printhead
Index(es):
- Date
- Thread