[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ZIP compatibility

Subject: Re: ZIP compatibility
From: dempson@atlantis.actrix.gen.nz (David Empson)
Date: 1995/11/17
Newsgroups: comp.sys.apple2
Organization: Actrix - Internet Services
References: <1995Nov16.125939.11492@relay.nswc.navy.mil>
Sender: news@actrix.gen.nz (News Administrator)

In article <1995Nov16.125939.11492@relay.nswc.navy.mil>,
Jack Mortimer <jemorti@relay.nswc.navy.mil> wrote:
> I know that there has been a lot of traffic regarding many aspects of the
> ZIP accellerator for the GS. I was not paying attention to those messages.
> 
> Is there a compatibility problem between the ZIP board and Apple SCSI rev c?

Not that I know of - my user group's BBS ran with this combination for
at least a year.

There is also no compatibility problem with an Apple High-speed SCSI
card or RamFast and a ZIP.

The TransWarp GS does have a compatibility problem with the RamFast
that limits DMA compatibility (can someone else elaborate?) but it
works fine with either type of Apple card, as far as I know.
-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand

Prev by Date: Re: Apple //e --> Modem
Next by Date: Postscript
Previous by thread: Re: Multi function printers etc use with IIGS
Next by thread: Postscript
Index(es):
- Date
- Thread