Re: IIGS power supply

[jamess@crash.cts.com (Jim Stafford)]

You might try and get a hold of Tony Diaz of All Tech Electronics. Tony 
made a cable for me that I can use to connect my GS to a tower case. The 
neat thing about this cable is that he put a GS connector on one end and 
a PC connector on the other. This way there was no soldering cables to 
the power supply, if something happens to the power supply I can just 
unplug the cable take out the old power supply, put a new one in and 
reconnect the cables.

I left my motherboard in my GS box and ran the cable from the tower case 
to the GS motherboard. Everything works just fine, the only problem is I 
have a lot of noise comming from one of my speakers than I did before. I 
think this is due to the way the wire has to go along the side of my 
computer due to lack of space.

I also got a scsi port made and have a 290mb hard drive in the tower case 
that works like a charm. I just a  6 foot scsi cable, plugged it into the 
extra port on the back of my Qdrive to the port on the back of the tower 
case and it work the first time I tried it!

keep on computin'

jamess