SCSI recognition

[Robert Rivkin <rrivkin@umbc.edu>]

I formatted a new SCSI quantum drive on a Rom01 with an Apple High Speed 
SCSI card.  I loaded system 6.0.1 onto it, tested it, no problems.

I took the SCSI drive to another Rom01 with a RamFast 3.01f.  It does not 
recognize a SCSI device.  I tried the same thing on a Rom03 with a 
RamFast 3.01e.  It does not recognize a SCSI device.  

I took the drive to a MAC and reformatted it into 1 partition.  I ran 
block tests, etc., and no problems were reported.  It worked properly on 
the MAC.

I brought it back to the IIGSs.  The RamFasts did not recognize a SCSI drive.
The Apple High Speed SCSI didn't at first recognize a SCSI device, but 
did with a reboot and then reformatted it to ProDOS.  The RamFasts still 
do not recognize a SCSI device.

Is there _anything_ someone can suggest for me to do to get the RamFast 
to recognize the hard drive so that I can format it for use on them?  
What am I doing wrong?

TIA