Re: Setting up a Transwarp IIe

[John Le Febvre <john@klatch.demon.co.uk>]

In article: <9940.678.uupcb@yob.com>  jeff.brielmaier@yob.com (Jeff Brielmaier)  writes:
> 
> 
> RT>I just received a Transwarp IIe card without manual.  So, naturally I have
> RT>a few questions before I just plug it in and waste it:

Well, my TransWarp //e arrived yesterday.  Plugged it in and it works great!
It too came without any documentation, so just for completeness, what are the
settings for the 2 x 8 dip switches?

Mine is a Rev 1.3, (c) 1985, and has a 65c02p4 chip.

Switches are as follows, assuming bank 1 is lower left furthest from the edge
connector.

  Bank1         Bank2
1  closed     1  open
2  closed     2  closed
3  closed     3  closed
4  closed     4  closed
5  closed     5  open
6  closed     6  open
7  closed     7  closed
8  open       8  open

Is there a way of disabling it for games (i.e. key press at power-up/re-boot?) 

Cheers
-- 
John.
john@klatch.demon.co.uk