[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

connecting to a calculator i/o port

Subject: connecting to a calculator i/o port
From: pbauer@ATHENA.MIT.EDU (Paul H Bauer)
Date: 1995/09/11
Newsgroups: comp.sys.apple2
Organization: Massachusetts Institute of Technology
References: <DEnFDz.L3K@murdoch.acc.Virginia.EDU> <42so2e$cgb@elna.ethz.ch> <431b8k$dmb@news-2.csn.net>

	I've just picked up one of the graphing calculators (TI-85) with the 
I/O port. There is available a cable and software for the PC and or Mac but
I was wondering if anyone has hooked one of these to a GS and if so what
is necessary for software and cableing although I realise the Mac cable should 
work.

	If you have had any experience doing this could you send E-mail or post
 to the area.

	Thanks.

			pbauer@mit.edu

References:
- Re: Micro$loth Windoze 95 Badges - how they should be
  - From: jwa2n@galen.med.Virginia.EDU (James W. Adams)
- Give me an aspirine (was: Windoze 95)
  - From: GUDATH@EZINFO.VMSMAIL.ETHZ.CH (GUDAT,HENRIK MICHAEL)
- Re: Give me an aspirine (was: Windoze 95)
  - From: bazyar@hypermall.com (Jawaid Bazyar)

Prev by Date: Re: Give me an aspirine (was: Windoze 95)
Next by Date: Re: Moderation?
Previous by thread: Re: Give me an aspirine (was: Windoze 95)
Next by thread: Re: connecting to a calculator i/o port
Index(es):
- Date
- Thread