Balloon v2.0 Command-A Problem Solved

[gsplusdiz@aol.com (GSPlusDiz)]

This morning, Joe was able to confirm that the source of the "Select All"
problem in Balloon v2.0 was indeed the INIT called "ListPatch".  If you
have ListPatch installed and you hit Command-A in a Balloon archive list
window, ListPatch will crash the system.  Remove ListPatch, and the
problem goes away.  (We HAVE been able to determine that this is a problem
inside ListPatch, and NOT a problem inside Balloon.)  We've also confirmed
that ListPatch is installed on the systems of everyone that sent us a list
of what was on their system.

So, if you are a Balloon v2.0 user and you are having the above problem,
check your *:System:System.Setup folder for an INIT called ListPatch.  If
its there, either deactivate it or remove it completely.  That should
clear up the problem.

Now, if someone would just tell us where ListPatch came from, we'll try to
contact the author about updating it.


----
Steven W. Disbrow
Publisher of GS+ Magazine & Addressed For Success & Balloon
Send me your e-mail address & I'll send you info on GS+!