[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Apple //c

Subject: Re: Apple //c
From: Michael Flynt <michaelflynt@delphi.com>
Date: 1995/05/09
Newsgroups: comp.sys.apple2
Organization: Delphi (info@delphi.com email, 800-695-4005 voice)
References: <3nmtug$i1@clam.rutgers.edu> <erik-2604952320430001@192.0.2.1> <D7p6Lq.BHB@actrix.gen.nz>

David Empson <dempson@atlantis.actrix.gen.nz> writes:
 
>I don't think you can install a ZIP CHIP and Z-RAM at the same time -
>they get in the way of each other.
 
No, they don't.  But it is a tight fit, and the Zip has to run at 1 mhz for
the CP/M card to work (Z-Ram Ultra II and III).

References:
- Apple //c
  - From: rwalsh@clam.rutgers.edu (Robert Walsh)
- Re: Apple //c
  - From: erik@hypermall.com (Erik Kloeppel)
- Re: Apple //c
  - From: dempson@atlantis.actrix.gen.nz (David Empson)

Prev by Date: Spreadsheet for GS
Next by Date: Looking for used AE Ramworks card for //e
Previous by thread: Re: Apple //c
Next by thread: Re: Apple //c
Index(es):
- Date
- Thread