Help needed for RamFast and NEC 3x CDROM

[hockleyd@dec3300.cuug.ab.ca (Dallas Hockley)]

Greetings all. I've got a small problem.

I have recently got ahold of an NEC 3X external cd-rom drive.  Model 500 I
believe.  I also, as a consequence, purchased the RamFAST 3.01ez upgrade.
I have the drive running using internal termination and as a SCSI-1 device,
and I have installed the driver and rom program from the new chip.  The
problem is, the cd-rom drive will now recognize a disk insert of a High-Sierra
format CD-ROM, and will accept it, but the disk will not show up on the finder
desktop.  I tried installing the DRIVE:CD-ROM from the System 6 distribution, 
but this also did not help.  As far as I know, the drive and card should work
without a hitch.  I have a ROM 03 box with 6 MB Ram, and I boot of a 105MB
Quantum for trivia.  I'm also running a 9Mhz Zip Card.  DMA enabled on 
the RamFast.  If anyone has any suggestions as to how I can get the system
to recognize the CD-ROM I would GREATLY appreciate it.  Thanks in advance.

Dallas Hockley
hockleyd@cuug.ab.ca