[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Controlling motors with Apple IIe

Subject: Re: Controlling motors with Apple IIe
From: bird@nwsrs.nw.att.com (J. L. Walters)
Date: Wed, 15 Feb 1995 01:55:35 GMT
Distribution: usa
Newsgroups: comp.sys.apple2, comp.sys.apple2.comm, comp.sys.apple2.marketplace, comp.sys.apple2.usergroups
Organization: AT&T NSC, 2600 Warrenville, Lisle, IL
References: <1995Feb14.101215.2342@ned.cray.com>
Sender: news@ssbunews.ih.att.com (Netnews Administration)
Xref: nntp.gmd.de comp.sys.apple2:53937 comp.sys.apple2.comm:2962 comp.sys.apple2.marketplace:5605 comp.sys.apple2.usergroups:597

In article <1995Feb14.101215.2342@ned.cray.com>,
Tony Laundrie  {x66591 CF/DEV} <atl@cray.com> wrote:
>- Does anybody manufacture a box to connect to one of the ports and provide
>  64-256 TTL-level I/O wires?  How about 120-volt wires?

Applied Engineering (out of business) made both an A-D and D-A
board. Perhaps Sun Remarketing or Alltech has a used board. Not sure on
the specs but I'd guess the analog output would run a small
voltage/amperage relay or solid state relay that would switch 120V or
whatever.

Kind Regards,
-- 

		Joe Walters att!nwsrs!bird NW 31K14 (708) 224-7189
		To know, and not to do, is not yet to know.

References:
- Controlling motors with Apple IIe
  - From: atl@cray.com (Tony Laundrie {x66591 CF/DEV})

Prev by Date: Re: Morgan Davis/ProLine Query
Next by Date: AW3/UM3.1 task file problem
Previous by thread: Controlling motors with Apple IIe
Next by thread: Re: Controlling motors with Apple IIe
Index(es):
- Date
- Thread