[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Problem with AWGS
- Subject: Problem with AWGS
- From: pbauer@ATHENA.MIT.EDU (Paul H Bauer)
- Date: 1 Nov 1994 14:19:40 GMT
- Keywords: AWGS GS ROM3
- Newsgroups: comp.sys.apple2
- Organization: Massachusetts Institute of Technology
I am using AWGS 1.1 on a Rom 3 GS as described later and am having the
following problem:
I create the following page layout document, which is just a line in
the middle of the page.
------------------
| |
| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| |
| |
------------------
When I print the document on an attached HP IIp laserjet printer, I
get the following depending on whether or not I print at 100 DPI or 300 DPI.
100 DPI 300 DPI
------------------ ------------------
| | | |
| | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | |
| | | |
------------------ ------------------
I get this type of pertabation with any graphics that has a series of
vertical lines but only from AWGS not any paint program, Screen Print program
etc.
The System:
GS Rom 3 with 9MHz 32k Zip
Slot 1 Apple Parallel Printer Card
Slot 2 Modem Port
Slot 3 Zip Card
Slot 4 empty
Slot 5 Ram Disk and 3.5 Disk drive
Slot 6 5.25 Drive
Slot 7 Apple HS SCSI Card
AUX Slot CVTech 4 Meg Ram with 1 Meg Apple Ram Card in
Piggy-back location. Ram configured with 2.4 Meg
Ram Disk.
The HP Laser printer has 4 Meg of Ram installed and is accessed thru
a parallel port.I have tested this with different printer cards and Dave
Empson's Printer Capture and the problem is repeatable. If I boot off a floppy
with the system disk supplied with AWGS 1.1 ( 5.04?), AWGS prints the above
correctly. I really don't want to give up 6.01 and the many handy inits, CDA's
nda's etc that I have installed.
Any ideas????????
pbauer@mit.edu