Re: pinout of the GS sound connector anyone?

[heathw@tyrell.net (Heath Winer)]

devernay@sophia.inria.fr (Frederic Devernay) writes:

>could anyone who has the GS Hardware Reference Manual send me the
>pinout for the sound connector?

>thanks.
>Fred
>-- 
>       *          Frederic.Devernay@sophia.inria.fr          *
>       * Projet ROBOTVIS -- INRIA Sophia Antipolis -- FRANCE *

Hi,
  Here it comes!

Sound Input/Output Connector

Pin       Signal Description                 Pin       Signal Description
 1        A/D Converter input                 5        Channel 1 address
 2        Analog Ground                       6        Channel Strobe/
 3        Analog Output                       7        Channel Address 2
 4        Channel Address 0

-----------------------------------------------------------------------------
Connector type: 7-pin Molex
This connector is located on the logic board, near the right - front side fo
(fo is of) the computer just below the memory expansion connector. Pin 1 is
located at the front of the logic board.

I hope this helps!
    Heath