Re: SCSI Partition question

[schultp@aa.wl.com (Paul Schultz)]

If the new drive is slower than your old hard drives then perhaps
your interleave is not optimally set. Most drives are low level
formatted these days with a 1:1 interleave. I believe that on your
IIe your interleave should probably be greater than this -- although
you didn't indicate what type of SCSI adapter you have. I assume it
isn't a RamFAST since you didn't mention using the RamFAST built-in
utilities. If you have an old Apple Rev. C SCSI adapter then you
definitely will need to adjust your interleave -- this requires a
low level format. 

Paul Schultz

--
===============================
Internet: schultp@aa.wl.com
===============================