Re: System Saver IIgs: Can it

[John_L._Graham@adbbs.antioch.edu (John L. Graham)]

Hi Stephen!
          I had a similar problem with a System Saver and I opened it up and
disconnected the fan for a while. Opening a System Saver is pretty straight
forard. There are a series of small, Phillips head screws hidden under the
foam seal that runs around the edge of the under side of the unit. Just probe
along the foam with a small screw driver and locate each hole. I don't think
you have to remove _any_ of the screws that are out on the body of the
system, these hold components to inside the unit. Also keep in mind that if
you elect to disconnect your fan you may run the risk of damaging the
computer if you have sevarl cards installed. So, proceed with a little
caution.

Have fun!

John