Apple //e Power Pins

[rhoover@cap.gwu.edu (Robert Hoover)]

Hey this is a neat little item. I am working on a case for
my HD's and I wanted to run a line from the 200w PS to my //e
because I keep eating these dinky little 60w Apple units and I
was running the pin outs on the Mother board and I have checked
them against the diagram on the PS it self and on the board in
the PS and I am getting a differnt set depending on what I am
looking at.
 
On my stock Apple unit... By what is on the PS Case
 
     _ Black GND
    |   ___________ Yellow +5 2.5a
  __|__|_____
  | O  O  O  \ ------- Blue -12v .25a
  |           |
  |_O__O__O__/ ------- Green -5v .25a
    |  |
    |  |___________ Orange +12v 1.5a
    |____ Black GND
 
But On the board in the PS case it goes like this
 
Blue  -  -5v
Green -  -12v
Orange-  +5v
Yellow-  +12v
Black -  Common GND
Black -  Common GND
 
The AE Power Supply is the same as the //e on the PS
board in the PS. Its back asswards from what it is on the
outside of the case...
 
 
Which is right ? I am trying to get this damn case right for
the mother board and I really dont want to have a second //e
husk around gathering dust....
 
        -Rob