[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Help: Can't use ProTerm at 9600.
- Subject: Re: Help: Can't use ProTerm at 9600.
- From: bird@hellas.att.com (J L. Walters)
- Date: Tue, 26 Jul 1994 00:19:37 GMT
- Newsgroups: comp.sys.apple2
- Organization: AT&T Network Software Center, Lisle, Illinois
- References: <30v376$23b@bach.udel.edu>
- Sender: news@nntpa.cb.att.com (Netnews Administration)
> I'm using a LineLink 14.4e modem with my Apple ][e, Super Serial Card
> (set jumpered at 9600), and the proterm settings with
> Hayes Smartmodem 2400.
----------------------
Hard to get 9600 out of a 2400 baud driver ;-)
Kind Regards,
--
Joe Walters att!hellas!bird NW 31K14 (708) 224-7189
To know, and not to do, is not yet to know.