[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pinout for Profile cable needed

Subject: Re: Pinout for Profile cable needed
From: dempson@actrix.gen.nz (David Empson)
Date: Sun, 17 Jul 1994 09:37:56 GMT
Newsgroups: comp.sys.apple2
Organization: Actrix Information Exchange
References: <CszJ0w.1I5@pts.mot.com> <mnementhCt13wn.Auz@netcom.com> <mnementhCt14G1.B8J@netcom.com>

In article <mnementhCt14G1.B8J@netcom.com>,
David R. Villegas <mnementh@netcom.com> wrote:
> The subject says it all.  Does the cable just have straight-through wiring?

Yes.  It is 25-way pin to pin, with male connectors at each end.

There is a catch: you must cut off pin 7 at each end of the cable: it
is blocked in the connector on the card and on the ProFile (to prevent
you from plugging a serial cable in by accident).
-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand

References:
- Pinout for DuoDisk cable needed
  - From: kburtch@xvnews.unconfigured.domain (Kevin Burtch)
- Re: Pinout for DuoDisk cable needed
  - From: mnementh@netcom.com (David R. Villegas)
- Pinout for Profile cable needed
  - From: mnementh@netcom.com (David R. Villegas)

Prev by Date: Re: RamFast SCSI safe w/o any devices?
Next by Date: Re: //gs info needed...
Previous by thread: Pinout for Profile cable needed
Next by thread: "Apple II!" on a ROM 3
Index(es):
- Date
- Thread