USRobotics Sportster 14.4k -> 16.8k DSH?

[phandel@sempco.UUCP (Peter Handel)]

>> I grabbed this off of a local *mac* BBS (ok, I was bored/drunk<g>):
>>
>> Len> Here try this...
>>
>> Len> If you have a USRobotics Sportster FAX modem, Ver 4.1, you can issue
>> Len> the following commands to it to turn it into an HST 16.8K dualstandard.
>> Len> In effect, you add HST 16.8K to its V32.bis 14.4k capability.
>>
>> Len> ats11=40v1L3x4&h1&r2&b1e1b1&m4&a3&k3
>> Len> atgw03c6,22gw05cd,2f
>> Len> ats14=1s24=150s26=1s32=8s34=0x7&w
>>
>> The second line gives an error...anyone else heard of this?
>>
>
> YES!!  It IS true.  At one point USR was using the exact same ROMs in
>their Dual Standard modems as they were in their newly released (at that
>time) Sportsters.  With a simple AT command you could effectively change
>your Sportster into a fake 16.8k dual standard.  I'm not sure if the
>above IS the correct string or not....
>
> Once word got out, those modems went like hotcakes here in Edmonton! You
>couldn't find one ANYWHERE!
>
>--
>Denis Fafard   denisf@ersys.edmonton.ab.ca
>Edmonton Remote Systems   Serving Edmonton/Northern Alberta since 1982

I'd really like to know the correct second init string...does anyone know it? 
Please? :)

--
_____________________________________________________________________________
|Apple IIGS Forever!                 |E-mail:sempco!phandel@wupost.wustl.edu |
|Zelix (Peter Handel)                |UUCP:  wupost.wustl.edu!sempco!phandel |
|Sysop of "Something in the Attic"   | "What does it profit a man, to gain a |
|(314) 275-7357, 14.4k, Apple II, IBM|  whole world, and yet lose your soul?"|
|____________________________________|_______________________________________|