PCT Trouble? HELP

[astdm@acad2.alaska.edu (Malone)]

I am having trouble getting my PC Transporter working.  I have a GS ROM 01,
RamFAST SCSI (slot 6), PCT (slot 7), 1 MB Ram, 1 3.5", dual 5.25 Transdrive.  I
have read through the manual and must be missing something.  

I get as far as launching the PCT system, get the AE BIOS printed on screen
then it moves to LOADING FROM DISK and then it locks up.  

I had the transdrives plugged directly into the PCT DB19, then the Apple 3.5
into the transdrive and it never made the access lights, light up.  I can hear
the constant running sound of the transdrive but nothing happens.  I actually
never got the 3.5 light to light up and it doesn't show up during the finder. 
The only way I see it is if I plug it into the smartport.  I took the
transdrives out and plugged the 3.5 into the PCT DB19 and the same thing
happened, no light or 3.5 shows up.  If anyone can tell me what I may be doing
wrong I'd appreciate it.  The PCT checks out as being good but I am not sure if
that can test the DB19 to see if its actually functioning properly.  

I have also changed the number of disks that are recognized by PCT but that
doesn't seem to help.  When I have the PCT configured for the 2 transdrives,
the 3.5 and the RAMDISK (RAMAEPC) when I go back to GS/OS finder it shows the
two 5.25s (TDs) as not being readable and ask to initialize or Eject.  When I
initialize no lights light up and the system reports the disks are write
protected.  HELP!