Re: 3.5" SCSI H-Disk in Disk ][ casing

[danb@pro-newton.cts.com (Dan Brown)]

In <1994Feb21.185528.11478@presby.edu>
sebugg@presby.edu (Stephen Buggie) writes:

>1. Will the standard Apple ][ power supply supply the correct voltages needed

        Yes, it will.  I don't know the pinouts though, except that the
center two pins on the drive are ground.

>2. Will there be enough power to operate the hard drive and also enough to run
>a 12 volt muffin fan?

        Easily.  The drive consumes less than 10 watts (around 6 if I
remember correctly); I think the Apple II p/s puts out somewhere around 60.

>3. Is the LED on the front panel of the Disk ][ plate of the correct voltage
>etc. to be used with the "in use" lamp port on the SCSI hard drive?

        Probably.

 ----------------------------------
Dan Brown, Sysop of pro-newton     Internet: danb@pro-newton.cts.com
 Above opinions are not those of Mensa, which has no opinions.
  GO D++ P+/-P+ C++ L+.5 M++ S+ G+- W+ T R-