Re: Imagewriter

[aa624@cleveland.Freenet.Edu (James Moores)]

In a previous article, lee@pro-novapple.clark.net (Lee Raesly) says:

>Not sure of this (it's been a while since I did it. But I am pretty sure
>that I used to connect a printer cable to the modem using a null modem from
>radio shack. If I am wrong, someone will let me (and you) know.
>
>Take Care, Now!  Lee...
>
>
>Mail:     Leon Raesly, LCSW-C                Internet:
>          7900 Old Branch Avenue #208        See below
>          Clinton, MD 20735 (USA)
>          Telephone (voice):
>               301+599-7671
>
>
>
>----
>ProLine:  lee@pro-novapple
>Internet: lee@pro-novapple.clark.net
>UUCP:     crash!pro-novapple!lee
>ARPA:     crash!pro-novapple!lee@nosc.mil

	The setup that I have working is:

	Imagewriter II -> Imagerwriter Cable -> Null Modem Cable ->
		Gender Changer -> PC Serial Port.

	You could substitute a regular 25 pin modem cable and a null modem
for the null modem cable.  If you have a 9 pin serial port, you'll need a
25 pin  to 9 pin serial cable.  All of the above are available at Radio
Shack or your nearest computer superstore.

Jim Moores
###
--
 _______________________________________________________________________
|       Reply-To: aa624@cleveland.Freenet.Edu (James Moores)            |
|Primary-Sysop - Cleveland FreeNet Apple2 Sig    -- Type "GO APPLE2" -- |
|  Co-Sysop    - Cleveland FreeNet Genealogy Sig -- Type "GO ROOTS" --  |