[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Using both Vulcan and SCSI

Subject: Re: Using both Vulcan and SCSI
From: meins@ll.mit.edu (Chuck Meins)
Date: Mon, 26 Jul 93 14:43:33 GMT
Newsgroups: comp.sys.apple2
Organization: MIT Lincoln Laboratory
References: <93Jul25.231727-0600.138423@amisk.cs.ualberta.ca>
Sender: meins@ll.mit.edu (Chuck Meins)

I've got an Apple Rev. C SCSI board driving a Bernoulli box and a 20 MB Vulcan in my GS
(ROM 1, 4 MB, PC Transporter, 5.25" disk controller).  Everybody seems to get along OK.
My only complaint is that the SCSI only sees one of the two Bernoulli drives, but that seems
to be a limit of the software.

					Chuck Meins, Jr.
					meins@ll.mit.edu

References:
- Using both Vulcan and SCSI
  - From: glyn@AMISK.CS.UALBERTA.CA (Reade Glyn Devin)

Prev by Date: Re: Shareware Solutions II
Next by Date: Re: GEnieLamp A2 July 1993
Previous by thread: Using both Vulcan and SCSI
Next by thread: Re: Using both Vulcan and SCSI
Index(es):
- Date
- Thread