Re: System 6.0.1 won't copy 3.5" disks

[jimmys@bonnie.ics.uci.edu (Jimmy Shaw)]

In article <CA9tvL.I3z@wave.scar.utoronto.ca> 90taobri@wave.scar.utoronto.ca (Brian Tao) writes:
>In article <2C463BD1.5950@ics.uci.edu>, Jimmy Shaw writes...
>>
>> After installing 6.0.1, I can't copy 3.5" (or 800K devices, such as
>> an 800K ram disk) from one to the other.  All attempts have failed
>> with a message similar to "The disk 'Blank' was ejected during its
>> operation.  This operation cannot be complete."
>
>    Do you have a ZipGS?  I recall this was a problem which David Empson
>tracked down to having Slot 6 (yes, 6) set on Fast rather than Normal.
>This was over a year ago, so my memory might be a little fuzzy on the
>details.  David?

Well, I have a zipGS, but slot 6 is set to normal, so that isn't
it.  Thanks though.

>--
>Brian Tao:: taob@io.org (Internex Online, 416-363-3783, 10 lines, v.32bis)
>::::::::::: 90taobri@wave.scar.utoronto.ca (University of Toronto, 9T4)

Jimmy



--
Jimmy Shaw		    RamFAST, ZipGSX and System 6... Apple II Forever!
jimmys@ics.uci.edu
-----------------------------------------------------------------------------