Re: Config. AW3.0 with HP DJ500

[jimmys@bonnie.ics.uci.edu (Jimmy Shaw)]

In article <2C361867.28773@ics.uci.edu> jimmys@ics.uci.edu (Jimmy Shaw) writes:
>
>Hi, I just got a HP DeskJet 500, and I am having a little problem trying
>to configure the custom printer with AppleWorks 3.0.
>
>So far, I've been able to enter the codes for BOLD FACE, italics, under-
>lines, and I got things like lines-per-inch and character-per-inch, and
>from what I understand, there is a .25 inch dead area in the left and
>right margins, so I was able to fake a 1 inch left and right margin
>in AW3.0 with the commands:  lm .7 and rm .7 to get "semi-" 1 inch
>margins.
>
>My questions are:
>
>1.  I can't seems to figure out Top and Bottom margins.  should I turned
> off the Perforation Skip (DIP A8 UP)?

Heh, I just figured out the TM and BM.  My assumption was correct, the
TM and BM are now correct, thanks to the Perf. Skip.

>2.  How do I get superscript and subscript?  I can't seem to find the
>control codes for those functions in the HP PCL Printer command chart,
>(section C-6) in my manual.

Question 2 still stands.  I can't seems to figure it out.

New question:

3. What should I use for the PRINTER CODE?  The default is
CONTROL I 80N.  I've tried leaving it and having no printer code,
and I didn't see any difference.  So for now, it's back to CTRL I 80N.

>That's all for now, I am going to play around with it a little more,
>and if I have any more questions, I'll let you know.
>
>Thanks in advance.
>

Jimmy


--
Jimmy Shaw		    RamFAST, ZipGSX and System 6... Apple II Forever!
jimmys@ics.uci.edu
-----------------------------------------------------------------------------