[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Booting SCSI Partitions

Subject: Re: Booting SCSI Partitions
From: jmk3@crux3.cit.cornell.edu (Jay Krell)
Date: 1 Apr 93 20:03:06 GMT
Newsgroups: comp.sys.apple2
Organization: Cornell University
References: <Mar.31.15.19.53.1993.15323@trident.usacs.rutgers.edu>
Sender: usenet@piccolo.cit.cornell.edu (NNTP Connect)

>Hey all.  I have a 42meg SCSI attached to the Apple HighSpeed SCSI
>card in slot 7 on my GS, and want to boot my /AUX partition.  However,
>its mapped as slot4, drive1, and that's only when I have GSOS (ie SCSI

You are only supposed to be able to from a hard drive's first partition
with the Apple card. I wonder what happens if you type pr#x where x
is a slot a partition is remapped to.
You need ProDOS 8 2.x to access more than 2 partitions from other than
slot 5.

--
  --Jay, jay.krell@cornell.edu

Follow-Ups:
- Re: Booting SCSI Partitions
  - From: david@wraith.cs.uow.edu.au (David E A Wilson)
- Re: Booting SCSI Partitions
  - From: bit@gnu.ai.mit.edu (bit.map)

References:
- Booting SCSI Partitions
  - From: scraft@trident.usacs.rutgers.edu (Steve Craft)

Prev by Date: Re: //c hard drives (again)
Next by Date: Re: Super Nintendo Programmer Wanted
Previous by thread: Re: Booting SCSI Partitions
Next by thread: Re: Booting SCSI Partitions
Index(es):
- Date
- Thread