[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Where do I find the start-of-program pointers in Applesoft?

Subject: Re: Where do I find the start-of-program pointers in Applesoft?
From: uerics@mcl.ucsb.edu (Eric D. Shepherd)
Date: 13 Feb 93 04:53:09 GMT
Newsgroups: comp.sys.apple2
References: <1993Feb11.073903.8710@ucc.su.OZ.AU> <1993Feb11.200529.24862@ee.rochester.edu>
Sender: news@ucsbcsl.ucsb.edu

As far as I can recall, the A parameter isn't valid for ProDOS 8 RUN commands.
However, the method you outlined (poking into 103 and 104 and re-RUNning the
program) works just fine in ProDOS 8.

- Eric S.

--
Eric D. Shepherd                   | Apple II Alliance Charter Member
InterNet: uerics@mcl.mcl.ucsb.edu  |           ACM Member
FidoNet:  1:206/2713 Eric Shepherd | Programming Law #1: "When in
AOL:      Sheppy                   | doubt, rewrite from scratch."

References:
- Where do I find the start-of-program pointers in Applesoft?
  - From: andy@extro.ucc.su.OZ.AU (Andrew Miehs)
- Re: Where do I find the start-of-program pointers in Applesoft?
  - From: seah@ee.rochester.edu (David Seah)

Prev by Date: Re: msdos 3.5" disks with apple 3.5" drives
Next by Date: Re: Mad about copy protection.....
Previous by thread: Re: Where do I find the start-of-program pointers in Applesoft?
Next by thread: PaintWriter
Index(es):
- Date
- Thread