Re: what is error "restart = 01"

[dlyons@Apple.COM (David A Lyons)]

In article <fmlin.28sq@terapin.com> fmlin@terapin.com (Frank M. Lin) writes:
>Subject says it all... what is "restart=$01" ( or "restart=01 ) in ProDOS 8?
>
>I get this message when I load up ProTERM 3 sometimes.  One interesting thing
>to note, If I keep the voltage at 5.4v, this message tend to go away, if I go
>to about 5.5v or 5.6v, this message would come up very frequently.

It's ProDOS 8 telling you about an unclaimed interrupt.  Some device sent
an interrupt signal in hardware (or you weirded out your hardware enough
that the CPU -thought- something did), and there was no software installed
to respond to the interrupt.
-- 
David A. Lyons, Apple Computer, Inc.      |   DAL Systems
Apple II System Software Engineer         |   P.O. Box 875
Internet:dlyons@apple.com                 |   Cupertino, CA 95015-0875

My opinions are my own, not Apple's.