Re: Plea to borrow Applied Engineering Vulcan IIe ROM(s)!

["atfphotography@gmail.com" <atfphotography@gmail.com>]

On Jul 9, 5:04 pm, "Garberstreet Electronics" <willy4...@comcast.net>
wrote:
> <atfphotogra...@gmail.com> wrote in message190a80c0-2edc-4a9c-92ac-d96d8bde2476@32g2000yqj.googlegroups.com">news:190a80c0-2edc-4a9c-92ac-d96d8bde2476@32g2000yqj.googlegroups.com...
> > Hello!
>
> > I've been fiddling with the Vulcan cards for a few months now and am
> > happy that Bill Garber and Henry Courbis have been assisting me in
> > figuring out how to make these useful again (besides using the
> > original drives).
>
> > Two things we really need are two different versions of the ROM chip
> > from a IIe Vulcan card.
>
> > We're pretty set with the IIgs Vulcan cards ROM versions unless you
> > have one we don't have listed (1.2/20, 1.4/40 and 2.0 GOLD).
>
> Correction: We have v1.2_GS20, v1.2_GS40, v1.4_GS20, v1.4_GS40, and 2.0 GOLD.
>
> > Can anyone loan us a ROM and/or card so we can dump the ROM to see if
> > we can get the cards working in the IIe and IIgs with additional
> > drives and CF cards?
>
> We basically need any ROM that works in a IIe, which would most
> likely be only 20 and 40 MB versions.
>
> > Any help would be tremendous!
>
> > Once we've got everything figured out (if possible), I'll also make
> > available the list of drives I have tested with the cards if you are
> > going for the more "restoration" route. If the cards can be re-
> > purposed for CF cards, we'll make that available as well!
>
> > Best,
>
> > ATF
>
> My quest to get CF cards working on the Vulcan controllers is
> mainly a personal endeavor, however, anything I should develop
> will be made available to all. Thank you.
>
> Garberstreet Electronicshttp://www.garberstreet.com

Hello,

Thanks for clarifying Bill!

ATF