On May 30, 10:38 pm, srk...@gmail.com wrote:
Sounds like the original apple IIe RGB card (which were a V7 design) -
the round connector may have gone to a Kaga/Taxan style RGB display at
one point. A couple of pictures would help a lot here I think.
With a bit info, im sure we can figure out where that red cable needs
to go. These cards produce a good picture on modern LCD displays with
RGB style inputs, such as SCART.
steve
On May 31, 2:18 pm, Sterling <ad...@ilc-it.net> wrote:
I got it in an Apple IIE system I purchased of Ebay last week.
It has a jumper like header with a blue and red wire coming out that
clips on a couple of IC's I guess on the motherboard. Under the jumper
it says VIDEO-7 INC. There is a cable coming off of it leading to a 9-
D connector on the back.
I had to remove it after receiving because the Red wire lead was no
longer on anything and I have no idea where it was supposed to go. Not
that I have anything connected to the D9 connector anyways.
It did come with a very odd D9 to 8 ping connector that I've never
seen before. Looks almost industrial.
The search on the web had lots of stuff on the Amdek cards being
mostly for disk drives, but this may be different.
Any ideas??- Hide quoted text -
- Show quoted text -
That sounds cool.
Right now I've got the Apple IIe connected through a cheap composite
to VGA converter to my Dell 17" LCD.
I must say the graphics loook great, but the text is really shifty and
hard to read.
It would be nice to find a cleaner way to get the video if possible.
Here is a picture of my card: http://rapidwave.net/amdek002.jpg
Any suggestions?