[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ROM 01 battery replacement - twisting leads ok?

appleworks51@yahoo.com wrote:

I have several Apple IIGS's.  Most of them were given to me by other
users who left the Apple II world and wanted a good home for their
machines.

Two of the IIGS's now have dead batteries. The Rom 03 doesn't appear
to be a problem - I got the battery out and I can buy a replacement.
Hopefully that will be easy.

I see from reading the FAQs and other threads that on the ROM 01 needs
a battery with leads. Some people have carefully twisted the leads of
the new battery with the old leads that are still attached to the
IIGS.  My question is: is this okay to do?

There is NO WAY I am going to do any soldering - either of the new
battery leads or a battery holder, which many people suggested.

So, is the twisting leads method sufficient?   Is it safe and secure?

And, would someone mind posting a link to a place where I can buy the
Rom 01 battery with leads?  Or the exact name of the battery (with
pictures)?

Any better suggestions?

Thanks,
Beverly Cadieux
TEXAS II an international newsletter for users of AppleWorks(R) 5.1
Not soldering will in time cause the connection to oxidize, which will open up the connection. Just get some small solder and a low wattage soldering tool, or maybe cold solder; don't know much about that, but 40 years with the telephone company in network construction has shown me that not soldering causes more problems then soldering 

--
The Only Good Spammer is a Dead one!! Have you hunted one down today? (c) 2009 I Kill Spammers, Inc. A Rot In Hell Co.