[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Apple Power Supply Questions
On Apr 13, 9:42 am, ]3ob <john@doh!.com> wrote:
> On 2009-04-13 09:36:57 -0400, capknight <cepheusfi...@gmail.com> said:
>
> > The Vulcan GS drives that I found in the 105mb range were the Conner
> > CP3104. Discount Computer Peripherals has a few in stock. They are
> > located athttp://www.4drives.com/. Someone was kind enough to point
> > me
> > to an FAQ or file that listed the exact drive types for the Vulcan
> > series.
>
> Could you point us to that info please? :) It'd be good to know what I
> can replace my 40Mb IIe drive with when it fails.
>
> > Henry over at Reactivemicro dug up a IIe ROM for the Vulcan card so I
> > can put one of them in my IIe. I need to do some research to make sure
> > the Vulcan GS and IIE card were the same except for the bios (crossing
> > fingers).
>
> Do you know what version that IIe ROM is? Mine is v1.4 either E or F
> (it's hard to know for sure because the printing ran off the bottom of
> the sticker) so I was just seeing if there's a newer version.
>
> Thanks!
>
> ]3ob
Hello!
I haven't received it yet, but as soon as I get it I'll let ya know!
Ok I hope this chart comes out..
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Drives used in the 20 meg Vulcan:
+PHYSICAL+ LOG.
PAGE
144
MANUFACTURER UNFORMAT WTH. PL CYLS ST CYLS INTERFACE ACC
XFER. POWER
MODEL NUMBER FORMATED HGT. HD PREC AC HDS REC.METH T-T
CACHE MTBF
L.Z. ST ADDITIONAL
COMMENTS
---------------------------------------------------------------------------
SEAGATE 25.0MB 3.50 2 404 26 615 IDE(AT) 40ms
7.5Mb 9.0W
ST125A-0 21.5MB HALF 4 NONE SM 4 (2,7)RLL 8.0ms
150K
AUTO 17
---------------------------------------------------------------------------
SEAGATE 25.0MB 3.50 2 404 26 615 IDE(AT) 28ms
7.5Mb 9.0W
ST125A-1 21.5MB HALF 4 NONE SM 4 (2,7)RLL 8.0ms 150K
(in mine) AUTO 17
---------------------------------------------------------------------------
Drives used in the 40 meg Vulcan:
+PHYSICAL+ LOG.
PAGE
144
MANUFACTURER UNFORMAT WTH. PL CYLS ST CYLS INTERFACE ACC
XFER. POWER
MODEL NUMBER FORMATED HGT. HD PREC AC HDS REC.METH T-T
CACHE MTBF
L.Z. ST ADDITIONAL
COMMENTS
---------------------------------------------------------------------------
WESTERN DIGITAL 48.0MB 3.50 2 782 27 977 IDE(AT) 70ms
7.8Mb 7.0W
WD93048-A 40.0MB HALF 4 SM 5 (2,7)RLL 4.5ms 30K
17 1:1
INTERLEAVE
---------------------------------------------------------------------------
WESTERN DIGITAL 48.0MB 3.50 2 782 27 977 IDE(AT) 69ms
7.8Mb 6.9W
WD93048-AD 43.2MB HALF 4 SM 5 (2,7)RLL 40K
(My original) 17 56 BIT ECC, 3:1
INTERLEAVE
---------------------------------------------------------------------------
WESTERN DIGITAL 48.0MB 3.50 2 782 27 977 IDE(AT) 28ms
7.8Mb 6.9W
WD93044-A 43.2MB HALF 4 SM 5 (2,7)RLL 4.0ms
8KB 40K
(Tried, works) 17 56 BIT ECC,
3,329 RPM
---------------------------------------------------------------------------
CONNER 3.50 2 788 26
CP-341 42.9MB HALF 4 NONE VC (2,7)RLL Works in
Vulcan
AUTO COMPAQ
OEM, TYPE 17
---------------------------------------------------------------------------
CONNER 3.50 2 805 26 IDE(AT) 29ms
7.5Mb
CP-342 42.9MB HALF 4 NONE VC (2,7)RLL Works in
Vulcan
AUTO
---------------------------------------------------------------------------
MINISCRIBE 51.3MB 3.50 2 745 28 IDE(AT) 28ms
8.0Mb 8.0W
MS8051A 42.7MB HALF 4 NONE VC (2,7)RLL 8.0ms
32KB 150K
AUTO
3,484 RPM
---------------------------------------------------------------------------
MAXTOR COLORADO 51.3MB 3.50 2 745 28 IDE(AT) 28ms
8.0Mb 8.0W
8051A 42.7MB HALF 4 VC (2,7)RLL 8.0ms
32KB 150K
AUTO
3,484 RPM
Vulcan Gold can use:
Conner CP30084 80meg 1/3 height C/H/S: 903/4/46
Conner CP3104 100meg 1/2 height C/H/S: 1547/4/33
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Hope that works for you!
C