Re: Anyone had any luck with "retr0bright"?

[chris155@gmail.com]

So, Rich -- You used the 12% peroxide, OxiClean (as found at the
supermarket) and a Fluorescent UV/Blacklight?

If so, i've got everything but the 12%.  So the "OxiClean" stuff in
the tub you can get at Target or what not works?

What did you use for the "gelling agent"? I tried Corn Starch, which
once heated applied quiet nicely - but I still didn't get the effect;
I'm guessing it was my weak 3% H202.

-Chris

On Mar 30, 8:44 am, Rich <Rich11...@gmail.com> wrote:
> RetrOBright
>
> OK, to tell the story right up front...
> It works!  And it works WELL!
>
> Here is the key location for information:http://retr0bright.wikispaces.com/
>
> It is messy, and it takes time, and it is work...
> but the results are unbelieveable.
>
> I had a really bad mouse, keyboard and a couple of other things to
> experiment with.  After I was done, the outside was the same color as
> the inside.
>
> The key ingredients are the Hydrogen Peroxide and the Oxy Brightener
> (and the UV light).  Everything else is just to keep it from drying out
> or to make it stick on horizontal surfaces.
>
> I've still got a lot of work to do to learn how to work on large pieces
> (monitor) efficiently; how to keep the solution from drying out during
> the six hours of exposure and many other issues, but the bottom line is,
> IT WORKS!
>
>       () ()
> Rich ('-')