Re: AE datalink 2400 modem cable...

[capknight <cepheusfilms@gmail.com>]

On Mar 25, 11:58 pm, rhohler <rick.hoh...@gmail.com> wrote:
> On Mar 22, 4:25 am, Nama <forums6...@mac.com> wrote:
>
> > I got a AE Datalink 2400 modem cable with some apple II stuff
> > recently, however it is missing the cable (and Manual). It is a REV C
> > board and it has a 6 pin header connecter at one end that I assume is
> > where the cable attaches. would anyone happen to know the pinouts for
> > the cable so I can build my own?
>
> > Or, does anyone know where I can find a manual for the datalink 2400
> > online.
>
> > Thanks again
> > Philip
>
> I looked through all of my stuff.  I found the manual for the Datalink
> but didn't find the Datalink 2400 manual.  I scanned a few photos of
> my Datalink 2400 cable.
>
> http://picasaweb.google.com/rick.hohler/AEDatalink2400Cable?authkey=G...
>
> It might not be very helpful though.  I tried to take the plastic
> cover off but it wouldn't come off.  At the phone connector side of
> the cable, inside the plastic enclosure is a small (~1/2" X 1-1/4")
> circuit board.  On the board is more than just a straight wire (from
> Datalink) to RJ11 wire connection.  And a ground wire.
>
> Might be easier to snag one off of ebay.  ;)
>
> Rick

Hello,

I just snagged a AE Datalink and manuals for $1 plus shipping on eBay
yesterday. Definitely keep an eye out and certainly don't pay more.

It's part of my ongoing (misplaced?) quest to collect everything AE
made.

Best!

ATF